Ready To Use Wet-Look Floor Polish - 5 Gallon

Polishing is the third (and most noticeable) step of the 4 step professional maintenance program. This pro grade formula leaves an attractive and glossy finish polish that resists heel marks and prevents slips in high traffic areas.

• Glossy Finishing Coat Polish
• Scuff & Slip Resistant
• Use On Vinyl (Vct), Sealed Concrete, Rubber And No-Wax Tile Floors
• For Heavy Maintenance Plans, Frequent Buffing/Burnishing

Instructions

Strip floor using Zep Commercial® Heavy-Duty Floor Stripper. Apply 1"2 coats of Zep Commercial® Stain-Resistant Floor Sealer. Allow floor to dry. Apply 4 thin coats of Zep Commercial® Wet Look Floor Finish. Allow floor to dry between coats; approximately 3 minutes under normal conditions. Zep Commercial® Wet Look Floor Finish should be maintained by frequent dust mopping and daily damp mopping with Zep Commercial® Neutral Floor Cleaner. Keep floor dust free. Maintain by dry burnishing with a beige pad. Best results are obtained if burnished 2 to 3 times each week. This product is able to be stripped and reapplied as needed.

Pro-Tip: Step #3 (part two) in the Floor Care 4 Step Process. For best results, dry burnish with a beige pad three times a week. To periodically rejuvenate the gloss, use a ultra high-speed burnisher with a natural beige pad.

California Prop. 65

WARNING: WARNING: This product can expose you to chemicals including 2-ethoxyethanol, pentadecafluorooctanoic acid, which is/are known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.