Zep Strip-Ease Heavy-Duty Floor Stripper – Removes Floor Finish – 5 Gallon

Zep Strip-Ease Floor Stripper is a heavy-duty, water-based floor stripper that eliminates even the toughest floor finishes. For resilient tile and other hard surfaces, this heavy-duty stripper deeply penetrates multiple layers of old polish, removing them efficiently without leaving any residue behind. The low-foaming formula eliminates the need for machine scrubbing or neutralizing, making cleanup easy and hassle-free.

• Deeply Effective Finish Removal: Quickly breaks down and removes tough floor finishes, ensuring a clean, finish-free surface that’s ready for polishing.
• Low-Foaming for Easy Rinsing: Minimizes suds for a straightforward cleanup, leaving no sticky residue behind.
• No-Scrub Performance: Strip-Ease lifts away finishes without the need for machine scrubbing or neutralizing.
• Versatile Use: Effectively strips tile and other flooring surface finishes, delivering reliable results on various materials.
• Powerful Application: Penetrates multiple layers of old floor finish, thoroughly loosening and removing heavy build-ups.

Instructions

Heavy Duty Stripping Without Agitation: Dilution: Mix 1 part Strip-Ease with 4 parts water for a strong solution. For best results, use hot water (130° - 150°F or 54° - 66°C). Application: Generously spread the solution over the area to be stripped, ensuring it covers all surfaces needing finish removal. Soaking Time: Allow the solution to sit and penetrate for at least 5 - 15 minutes. Avoid letting it dry on the floor, as dried solution may cause the removed finish to re-bond with the floor. Removal: Use a mop or wet vacuum to fully remove the solution, then rinse twice to ensure all residues are gone. Allow the floor to dry completely before applying a new finish. Floor Stripping with Agitation: Light to Medium Duty Stripping: Dilute 1 part Strip-Ease with 15 parts water for a lighter solution, ideal for removing less build-up. Use hot water (130° - 150°F or 54° - 66°C) to enhance effectiveness. Heavy Duty Stripping: For more challenging finishes, dilute 1 part Strip-Ease with 4 parts water and apply with hot water (130° - 150°F or 54° - 66°C). Application and Soaking: Spread the solution over the floor and allow it to soak for 5 – 15 minutes. Ensure it doesn’t dry on the surface. Agitation: Use a brush or stripping pad, either manually or with a floor machine, to agitate and lift the finish. Removal and Rinse: Completely remove the solution with a mop or wet vacuum. Rinse twice thoroughly to remove any remaining product, then allow the floor to dry. Storage: Store tightly closed in a dry area between 40°F (4°C) and 120°F (49°C). Avoid storing below 32°F (0°C) and keep away from food and food products for safety.

For Ingredient Disclosures and SDS Information Click Here