Zep T’N’T Brushless Truck & Trailer Wash + Professional Sprayer Bundle

Keeping trucks, trailers, RVs, and fleet vehicles clean can take too much time when road film, grease, exhaust deposits, and bug residue build up. The Zep T’N’T Truck & Trailer Wash and Professional Sprayer Bundle gives crews a simple way to tackle tough exterior grime with less scrubbing. Dilute the concentrated truck wash, apply it with the refillable professional sprayer, and rinse away loosened buildup for a cleaner-looking vehicle that is ready to get back on the road.

• Spend Less Time Scrubbing: T’N’T helps loosen road film, grease, exhaust deposits, bug residue, and salt buildup so fleet cleaning is easier.
• Follow a Simple Cleaning Routine: Dilute the cleaner, spray it where needed, and rinse thoroughly to remove loosened grime.
• Apply Cleaner with Better Control: The professional sprayer helps crews target larger surfaces and problem areas with an adjustable nozzle.
• Clean Multiple Vehicle Types: Ideal for trucks, trailers, RVs, fleet vehicles, and other heavy-duty exterior cleaning jobs.
• Keep Vehicles Ready for the Road: Regular cleaning helps maintain a cleaner appearance without turning every wash into a major job.

Instructions

Dilution Rate: Mix 1 part Zep T'N'T with 25 parts water for removal of heavy soil, road film, or salt residue without brushing. Mix 1 part Zep T'N'T with up to 100 parts water for light cleaning or to use with brushing. Temperature: Zep T'N'T will remove soil at low temperatures; however, higher temperatures will greatly improve performance. Pressure: Apply Zep T'N'T to surfaces with high or low pressure. High pressure will enhance product performance. For Best Results apply at high temperatures (140°-160°F) and high pressure (above 600 psi), to a dry surface. Always rinse with high-pressure water. 1. Apply dilutions to surface to be cleaned, working from bottom to top to avoid streaking. Zep T'N'T may be applied to as large a surface area as desired, being careful not to allow Zep T'N'T to dry on surface. (For example, apply to one side of a trailer.) 2. Rinse thoroughly with high-pressure water, working from top to bottom. 3. Hold pressure nozzle 12" from vehicle surface. AUTOMATIC CAR WASHES Prep Gun: Mix 1 part with 64-128 parts water. Apply to dry vehicle, allowing a maximum of 15 to 20 seconds before detergent application. Touchless & Hybrid Systems: Mix 1 part with 64-128 parts water. Apply to vehicle through high-pressure spray equipment. Wheel Wash: Mix 1 part with 25 parts water. Apply to dry wheels (tires). Allow 10 to 20 seconds contact time, agitate as necessary, then rinse thoroughly with a strong stream of water. Rinse immediately from painted surfaces to eliminate possible discoloration. Not recommended for polished aluminum or magnesium wheels as streaking or dulling may occur. NOTE: Test on an inconspicuous area when using on a surface for the first time. DO NOT allow overspray to dry on glass surfaces. Immediately rinse to prevent formation of stubborn residue. DO NOT use in self-service or manual car wash applications.

For Ingredient Disclosures and SDS Information Click Here